FujiFilm X-T2 Body
- Calculated at Checkout
- Mega Pixels:
- 4K UHD Video,Bluetooth,Raw Image Capture
- 24.3MP APS-C X-Trans CMOS III Sensor
- X-Processor Pro Engine
- 0.77x 2.36m-Dot OLED Viewfinder
- 3.0" 1.04m-Dot 3-Way Tilting LCD Screen
- Internal UHD 4K Video & F-Log Gamma
- Built-In Wi-Fi Connectivity
- 325-Point Intelligent Hybrid AF System
- Up to 8 fps Shooting and ISO 51200
- Weather-Sealed Body; Two UHS-II SD Slots
- Film Simulation and Grain Effect Modes
24.3MP X-Trans* CMOS III Sensor
The FUJIFILM X-T2 features a 24.3MP X-Trans CMOS III APS-C sensor for outstanding image quality. Its highly random pixel array effectively reduces moiré and false colors without the use of an optical low-pass filter. When combined with an XF lens, the sensor delivers images with a perceived resolution far greater than the number of pixels used. Other features include outstanding read speed, high-speed continuous shooting, high-precision AF tracking, highly faster liveview refresh rate and superb video recording.
|The sensor readout speed is now approximately twice as fast,
delivering high-speed continuous shooting, precise AF tracking,
playback and higher quality movies.
Excellent image processing from X-Processor Pro
The X-Processor Pro image processing engine is approximately four times faster than the previous model. The increased built-in memory and enhanced computational power bring out the maximum capabilities of the X-Trans CMOS III sensor. It produces high quality images and improves response times for shorter delays between shots, reduced shutter-release time lag and greater AF precision. The engine also delivers faster Live View refresh rates and reduces image delay when tracking moving subjects.
The FUJIFILM X-T2 features a new CPU for high-speed processing. The Buffer
Film Simulation modes reflect Fujifilm's color philosophy created through years of photographic film manufacturing
Incorporating knowledge developed from over 80 years of photographic film manufacturing, the FUJIFILM X-T2's Film Simulation modes allow you to enjoy different color tones and rich gradations as if actually swapping films. A total of 15 modes are available, including PROVIA and Velvia to reproduce vibrant colors, plus ACROS for fine-detailed monochrome images. The Grain Effect function can be combined with all Film Simulation modes to add a textured look and deliver a greater range of artistic effects.
|CLASSIC CHROME||PRO NEG HIGH||PRO NEG STANDARD|
ACROS (+Ye / R / G FILTER)
MONOCHROME (+Ye / R / G FILTER)
Larger high-speed and high-precision phase detection AF area coupled with performance improvements
AF performance has been improved in a number of keys areas. The fast and accurate phase detection AF now covers a larger part of the frame and has been optimized in the area where users are most likely to position the main subject. At the same time, the FUJIFILM X-T2 boasts significant focusing improvements on small highlights, low contrast subjects and subjects with fine textures, which have previously caused problems for focal plane phase detection AF. Contrast detection AF, which excels in low light conditions, has also received a performance boost, with the ability to accurately focus in light levels as low as -3EV. The camera also refocuses more regularly during the slow burst mode in AF-C.
|The phase detection area has been expanded
by approx. 230% compared to previous models,
with the number of focus points increasing
from 49 to 91 (up to 325). The camera also
activates phase detection AF more frequently
to take advantage of its AF speed and accuracy
in a greater variety of situations.
The AF algorithm has been improved to
Eye Detection AF automatically detects human eyes
Choose Face Detection to automatically detect human faces, or turn on Eye Detection AF to automatically detect and accurately focus on human eyes for successful portraits with a shallow depth of field. You can also define the area of priority focus, for example right or left eye, or the eye closer to the camera. These functions have been upgraded for improved accuracy to a level that will impress professional photographers. They are particularly effective when shooting with the XF56mmF1.2 R / XF56mmF1.2 R APD or XF90mmF2 R LM WR lenses.
Pinpoint accurate focusing in MF mode
The FUJIFILM X-T2 has a variety of functions that assist pinpoint focusing in the MF mode. Set the Focus Mode Lever to MF and rotate the focus ring to access a variety of MF Assist functions. These include Focus Peaking, in which color is used to show the parts of the image that are in focus, and Digital Split Image, where focus is achieved by lining up the split image strips in the center. These features are particularly useful in macro photography and portraiture, which involve a shallow depth of field and require focusing precision.
Speed Tracking Sensitivity
Zone area Switching
This setting allows you to specify whether the camera should switch its focus to a different subject or retain its focus to wait for the subject to reappear. This control is useful when the object you are tracking disappears behind an obstacle, goes out of the frame or when a second object at a substantially different distance from the subject comes into the frame, Selecting 0 makes the camera switch its focus immediately, while choosing 1-4 progressively lengthens the time it will retain focus.
|This setting defines the camera's tracking characteristics based on changes to the subject's speed. Selecting 0 (constant speed), the camera does not consider change of speed when predicting subject movements. Choose 2 (variable speed) and the camera takes speed changes into account when predicting subject movement, making it suitable for accelerating or decelerating subjects.||This setting is available only in the Zone AF mode, and allows you to specify which part of the selected focusing zone should be given focusing priority. Select CENTER to maintain focus in the center of the frame, or FRONT to switch the focus to a subject at the front of frame when the original subject moves out of shot. AUTO tracks the subject you first focused on.|
AF-C Custom Settings
The AF-C Custom Setting allows you to select one of five AF presets according to the subject's movements to obtain perfect focus tracking. Based on how the subject moves, you can select a preset from, for example, Preset 2: Ignoring obstacles, Preset 3: For subjects that accelerate / decelerate, Preset 4: For subjects that suddenly come into the frame or Preset 5: Subjects with erratic movements to obtain optimum settings for accurate subject tracking. A combination of three factors: Tracking sensitivity, Speed tracking sensitivity and Zone area switching, may be manually set and registered as Preset 6: Custom.
Preset 1: Basic
This is a standard setting for moving subjects in general. It is used by default when there is no specific AF-C Custom Setting selected. This is closest to the AF-C setting on previous models.
Preset 1: Basic
This is a standard setting for moving subjects in general. It is used by default when there is no specific AF-C Custom Setting selected. This is closest to the AF-C setting on previous models.
Preset 2: Ignoring obstacles
Suitable when objects other than the subject enter the focusing area due to the subject going out of the frame or obstacles obscuring the subject.
Preset 3: Accelerating / decelerating subjects
The perfect setting for subjects whose speed of movement changes significantly. It is particularly effective when using a lens featuring a linear motor for high-speed focus tracking.
Preset 4: For subjects that suddenly come into the frame
Allows the camera to instantly focus on a subject that comes into the focusing area, with priority given to objects closest to the camera. It is ideal for subjects that suddenly appear in the focusing frame.
Preset 5: Erratically moving subjects
This is suitable when subjects are moving at varying speeds in different directions, coming in and out of the focusing area. It is perfect for shooting field sports, etc.
Preset 6: Custom
Manually create a preset optimized for the specific movement characteristics of your subject. You can adjust subject retention level, acceleration / deceleration level and zone area priority to your preference, then save them using this preset.
Get back to basics by shooting through the viewfinder
High-resolution Real Time Viewfinder with a 0.77x magnification ratio
The 2.36-million-dot high-resolution organic EL electronic viewfinder has a magnification ratio of 0.77x, a horizontal viewing angle of 31 degrees, and a display time lag of just 0.005 seconds. The viewfinder, which is 2 times brighter than the previous model, also features an automatic brightness adjustment function so it's easy to see in all conditions - even intense backlighting. It completely eliminates moiré or false colors, and boasts performance comparable to an optical viewfinder, but with the added advantage of displaying a live view that reflects exposure settings.
Up to 100 fps EVF refresh rate for a clear display even in low light
As standard, the EVF refreshes at a rate of 60 fps, but in Boost mode this jumps to 100fps, which continuously displays even fast-moving subjects smoothly to deliver a performance comparable to that of an optical viewfinder. The fast refresh rate is maintained even in low light for easy framing during night shooting.
Focusing on subjects with erratic movements
Continuous shooting performance has also been improved, enabling up to 11fps when using the mechanical shutter* and 5fps in the Live View mode. The viewfinder blackout time is now less than half that of the previous model. This means that you can track a fast-moving subject more easily for an extended period of time during continuous shooting. The combination of advanced continuous shooting options and EVF performance deliver continuous AF-C shooting never previously thought possible with mirrorless cameras.
Difference in blackout times between previous model and X-T2
Fresh shooting experience with clear details and a comfortable at-a-glance view of your settings.
"FULL" mode takes full advantage of the high magnification ratio of the FUJIFILM X-T2's viewfinder to give an unrivalled view of the scene. "NORMAL" provides an optimum view, including shooting settings and "DUAL" is specially designed for manual focusing with a clever split view. In the "NORMAL" and "FULL" modes, the view automatically rotates for a vertical orientation when the camera is held vertically.
Taking full advantage of the high magnification ratio of the FUJIFILM X-T2's viewfinder, "FULL" mode gives you the full field of vision available. Any obstruction of the view is avoided by placing shooting information at the top and bottom of the display screen. Ideal for composing expansive landscapes, Wide is also great when manually focusing portraits and other subjects, allowing you to easily determine the perfect focus.
When shooting with Autofocus, the "NORMAL" mode lets you concentrate on framing the shot while keeping you aware of how the shooting conditions are changing, making it the perfect setting for sports and action photography.
Hold the camera vertically and the information display automatically and smoothly rotates so it's ideally positioned for easy reading. Without taking your eye from the viewfinder, you can also check your images in vertical orientation for a truly seamless shooting experience.
In the viewfinder's "DUAL" mode, you can enjoy a view of the subject unlike anything seen through a traditional optical viewfinder. In Manual Focus, Dual cleverly displays a split screen that lets you see both a regular view of the scene, as well as the Focus Assist view (Focus Peaking and Digital Split Image Focus) at the same time, so focusing is easy and precise.
High quality video recording
Outstanding 4K high-definition video
The FUJIFILM X-T2 captures approx. 1.8x the required number of pixels for 4K video (4K/30P, 25P, 24P) and 2.4x the required data for full HD video (1080/60P, 50P, 24P) to deliver superior movie quality free from moiré or artifacts. It also supports the high bit rate of 100Mbps.
Film Simulation on video recording
Film Simulation modes are available during video recording. Movie shooters can enjoy extra creativity, without the need for lengthy post-production, including monochrome video in ACROS and documentary-themed tones in CLASSIC CHROME. You can also change settings such as aperture, shutter speed and exposure compensation while recording video.
Simultaneous HDMI output to an external monitor
Video can be output via HDMI during recording, allowing you to simultaneously check footage on the camera's LCD monitor or EVF and an external monitor. The data can even be recorded onto an external recorder as you film in the uncompressed format. As for 4K movie, you can choose log gamma "F-Log" to record a wider dynamic range than normal video mode.
For photographers who demand precise operation in all conditions
Solid body with resistance to dust, moisture and low temperatures
The FUJIFILM X-T2's body is made of magnesium alloy. Despite being compact and lightweight, it is both solid and highly durable. The body is also weather-sealed in 63 points to achieve a high level of resistance to dust and moisture. Couple this with its ability to work in temperatures down to -10°C and you'll see the camera is ready for anything. Similar weather-sealing is applied to the dust-resistant and water-resistant lenses and the Power Booster Grip to provide weather resistance across the entire system.
Dual SD card slots
The body features dual slots to accommodate two SD cards for highly reliable data storage. Both Slot 1 and Slot 2 are compatible with UHS-II standards for excellent write speeds. You can use the slots for sequential recording, backup, sorting to record RAW files in Slot 1 and JPEG files in Slot 2, or assign one of the slots for video storage.
Exceptionally balanced for a comfortable and reliable grip
The FUJIFILM X-T1's grip has been further developed and now offers even greater comfort on the FUJIFILM X-T2 thanks to a larger area set aside as a thumb rest. Locking mechanisms have also been introduced for the SD Card Cover and Battery Cover.
Three-direction tilting LCD screen
The FUJIFILM X-T2 features a premium LCD screen that can tilt in three directions. Tilt it up and down when shooting in landscape, and upward when shooting in portrait. The screen remains positioned on the optical axis of the lens for easier high-angle and low-angle shooting. The 3-inch LCD has 1.04 million dots and uses toughened glass. When not tilted, it fits flush to the body.
Dial-based operation means you're better prepared for any photo opportunities
Lockable dials deliver quick and simple handling
Key exposure controls are dial-based, such as setting the shutter speed, ISO sensitivity, exposure compensation, Drive Mode and Metering Mode. This means settings can easily be changed, even when the camera is turned off. Selected controls also feature lock and release buttons to enhance overall operation.
Exposure Compensation Dial with the C position
The frequently-used exposure compensation function can be operated using the top-plate dial for adjustments in 1/3 increments up to ±3EV. Select the C position for exposure compensation of up to ±5EV using the camera's Command Dial. When using the Power Booster Grip featuring the Command Dial, select the C position to access exposure compensation with the camera held in the portrait orientation.
Highly-durable focal plane shutter with a maximum speed of 1/8000 sec.
The FUJIFILM X-T2 features a focal plane shutter with a maximum speed of 1/8000 sec, flash sync speed of 1/250 sec and durability of 150,000 shots. It also supports an ultra-fast, silent-operating electronic shutter with a maximum speed of 1/32,000 sec that allows you to shoot at wide apertures, even in bright sunlight.
Grip specifically designed for the X-T2 to bring out the camera's maximum potential
Vertical Power Booster Grip
The Vertical Power Booster Grip VPB-XT2 can fit two batteries to boost the maximum number of shots per charge to approx. 1,000*. It not only lets you hold the camera vertically more confidently, but also features a shutter release button, Q button, focus lever, command dials, AE-L button and more to maintain the same level of excellent operability during shooting. The grip features a tripod mounting socket in line with the camera's optical axis, and is resistant to dust and water. The grip itself has battery-charging functionality, and is capable of fully charging two batteries in two hours.
You may return most new, unopened items within 10 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
We can ship to any address in the United States. We do not offer international shipping.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
|Model Name||FUJIFILM X-T2|
|Number of effective pixels||24.3 millions pixels|
|Image sensor||23.6mm x 15.6mm(APS-C)X-Trans CMOS III with primary color filter.
|Storage media||SD Card (-2G) / SDHC Card (-32G) / SDXC Card (-256G) UHS-I / UHS-II*1|
|Number of recorded pixels||
L: (3:2) 6000 x 4000 / (16:9) 6000 x 3376 / (1:1) 4000 x 4000
|Lens mount||FUJIFILM X mount|
|Sensitivity||Standard Output Sensitivity : AUTO1 / AUTO2 / AUTO3(up to ISO12800) / ISO200 to 12800(1/3 step)
Extended output sensitivity : ISO100 / 25600 / 51200
|Exposure control||TTL 256-zone metering, Multi / Spot / Average / Center Weighted|
|Exposure mode||P(Program AE) / A(Aperture Priority AE) / S(Shutter Speed Priority AE) / M(Manual Exposure)|
|Exposure compensation||-5.0EV - +5.0EV, 1/3EV step
(movie recording : -2.0EV - +2.0EV)
|Image Stabilizer||Supported with OIS type lenses|
|Shutter type||Focal Plane Shutter|
|Continuous shooting||Approx. 14.0 fps [Only Electronic Shutter](JPEG: 42 frames, Lossless compression RAW: 28 frames, Uncompressed RAW: 25 frames)
Approx. 11.0fps [with VPB-XT2](JPEG: 73 frames, Lossless compression RAW: 30 frames, Uncompressed RAW: 27 frames)
Approx. 8.0fps (JPEG: 83 frames, Lossless compression RAW: 33 frames, Uncompressed RAW: 27 frames)
Approx. 5.0fps (JPEG: endless, Lossless Compression RAW: 39 frames, Uncompressed RAW: 30 frames)
|Auto bracketing||AE Bracketing(±2EV / ±5/3EV / ±4/3EV / ±1EV / ±2/3EV / ±1/3EV)
Film simulation bracketing(Any 3 types of film simulation selectable)
Dynamic Range Bracketing (100% · 200% · 400%)
ISO sensitivity Bracketing (±1/3EV / ±2/3EV / ±1EV)
White Balance Bracketing (±1 / ±2 / ±3)
|White balance||Automatic Scene recognition / Custom1~3 / Color temperature selection (2500K~10000K) /
Preset: Fine,Shade, Fluorescent light (Daylight), Fluorescent light (Warm White), Fluorescent light (Cool White),Incandescent light, Underwater
|Self-timer||10sec. / 2sec.|
|Interval timer shooting||Yes (Setting : Interval, Number of shots, Startinng time)|
|Hot shoe||Yes (Dedicated TTL Flash compatible)|
|Viewfinder||0.5 inch approx. 2.36 millions dots OLED Color Viewfinder Coverage of viewing area vs. capturing area: approx. 100%
Eyepoint: approx. 23mm (from the rear end of the camera's eyepiece) Diopter adjustment: -4~+2m-1
Magnification: 0.77x with 50mm lens (35mm equivalent) at infinity and diopter set to -1.0m-1
Diagonal angle of view: approx. 38° (Horizontal angle of view: approx. 31° )
Built-in eye sensor
|LCD monitor||3.0 inch, aspect ratio 3:2, approx. 1,040K-dot,|
|Movie recording||[4K (3840x2160)] 29.97p / 25p / 24p / 23.98p 100Mbps up to approx. 10min.
[Full HD (1920x1080)] 59.94p / 50p / 29.97p / 25p / 24p / 23.98p 100Mbps up to approx. 15 min.
[HD (1280x720)] 59.94p / 50p / 29.97p / 25p / 24p / 23.98p 50Mbps up to approx. 30min.
|Film Simulation mode||15 modes (PROVIA/Standard, Velvia/Vivid, ASTIA/Soft, CLASSIC CHROME, PRO Neg.Hi, PRO Neg.Std, Black & White, Black & White+Ye Filter, Black & White+R Filter, Black & White+G Filter, Sepia, ACROS,ACROS+Ye Filter, ACROS+R Filter, ACROS+G Filter)|
|Dynamic range setting||AUTO, 100%, 200%, 400%
ISO restriction (DR100%: No limit, DR200%: ISO400 or more, DR400%: ISO800 or more)
|Advanced filter||Toy camera, Miniature, Pop color, High-key, Low-key, Dynamic tone, Soft focus,Partial color (Red / Orange / Yellow / Green / Blue / Purple)|
|Wireless function||Geotagging, Wireless communication (Image transfer), View & Obtain Images, Remote camera shooting,PC Autosave, instax printer print|
|Other functions||PANORAMA, AF-C CUSTOM SETTINGS, 4K MOVIE OUTPUT, SHUTTER AE, SHUTTER AF, AF-ON,Exif Print, PRINT Image Matching II, Language (35 languages including JP/EN), Time difference,Exposure preview on LCD during Manual mode, EVF brightness, EVF color, LCD brightness, LCD color,Mode effect on monitor, Customize|
|Power supply||NP-W126S Li-ion battery (included)|
|Dimensions||132.5mm (W) x 91.8mm (H) x 49.2mm (D) (minimum depth 35.4mm)|
|Weight||Approx 507g(including battery and memory card)
Approx 457g(excluding battery and memory card)
|Operating Temperature||-10°C - 40°C|
|Operating Humidity||10 - 80% (no condensation)|
|Battery life for still images*4||Approx. 340 frames (NORMAL MODE), Approx. 1,000 frames (with VPB-XT2) When XF35mmF1.4 R is set.|
|Starting up period||Approx 0.3sec.
|Accessories included||Li-ion battery NP-W126S
Battery charger BC-W126
Shoe-mount flash unit EF-X8
Clip attaching tool
Hot shoe cover
Vertical Power Booster Grip connector cover
Sync terminal cover
- *1Please see the Fujifilm website (http://www.fujifilm.com/support/digital_cameras/compatibility/card/x/) to check memory card compatibility.
- *2Exif 2.3 is a digital camera file format that contains a variety of shooting information for optimal printing.
- *3The Electronic Shutter may not be suitable for fast-moving objects. Flash can not be used.
- *4Approximate number of frames that can be taken with a fully-charged battery based on CIPA standard.